Author Topic: Christmas LED strips.  (Read 1729 times)

0 Members and 1 Guest are viewing this topic.

Offline robjodicarterTopic starter

  • Regular Contributor
  • *
  • Posts: 51
Christmas LED strips.
« on: October 21, 2018, 02:50:15 pm »
So what I'm going to try to do is the easiest way to hook up a total of 5 strips of rgb's. They will be in 3 different places so 3 different channels but I want to use only one remote to control all the lights. Is that at all possible? And if possible to be able to alternate red and green for Christmas and such. If not it's Arduino I go.
Thank you all
Rob

Sent from my PH-1 using Tapatalk

 

Offline madires

  • Super Contributor
  • ***
  • Posts: 9261
  • Country: de
  • A qualified hobbyist ;)
Re: Christmas LED strips.
« Reply #1 on: October 21, 2018, 03:06:46 pm »
Same color program for all strips? Or different programs for each place? Or do you mean three controllers and one RC?
 

Offline robjodicarterTopic starter

  • Regular Contributor
  • *
  • Posts: 51
Re: Christmas LED strips.
« Reply #2 on: October 21, 2018, 03:15:01 pm »
So 3 windows on one channel,  one channel door and one channel on gutter. All independent channels to program or I can sync them to the same color. Just need to find a remote that allows me to change the one channel at a time if possible.

Sent from my PH-1 using Tapatalk

 

Offline madires

  • Super Contributor
  • ***
  • Posts: 9261
  • Country: de
  • A qualified hobbyist ;)
Re: Christmas LED strips.
« Reply #3 on: October 21, 2018, 03:32:13 pm »
You can buy cheap RGB controllers with an IR RC from China, but you might be not very happy with the programs available. Or maybe build custom ones (µC with three PWM channels, FETs, an IR receiver module plus one universal RC).
 

Offline robjodicarterTopic starter

  • Regular Contributor
  • *
  • Posts: 51
Re: Christmas LED strips.
« Reply #4 on: October 21, 2018, 03:33:58 pm »
Yeah, I was just going to go Arduino but where is a good place to get sketch's for LED strips. Do you know?


Sent from my PH-1 using Tapatalk

 

Offline madires

  • Super Contributor
  • ***
  • Posts: 9261
  • Country: de
  • A qualified hobbyist ;)
Re: Christmas LED strips.
« Reply #5 on: October 21, 2018, 03:43:42 pm »
Have you tried to search for "arduino RGB strip"?
 

Offline robjodicarterTopic starter

  • Regular Contributor
  • *
  • Posts: 51
Re: Christmas LED strips.
« Reply #6 on: October 21, 2018, 03:45:26 pm »
Yeah they show up as addressable LED's, that is fine I'm just trying to find a collection of sketch's to dig thru and find one that I can tune to my needs.
Rob

Sent from my PH-1 using Tapatalk

 

Offline Twoflower

  • Frequent Contributor
  • **
  • Posts: 745
  • Country: de
Re: Christmas LED strips.
« Reply #7 on: October 21, 2018, 04:05:13 pm »
How about using ESP8266? You can use the WLAN functionality to sync them and they're cheap. Or using Z-wave for syncing the individual devices.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 

- - -
-->