| Electronics > Projects, Designs, and Technical Stuff |
| Alternative to APW7137 |
| (1/1) |
| fx991ex:
I need to replace APW7137 regulator from ANPEC on a circuit. The regulator is hardly available. Is there an alternative that I can use? Datasheet: http://pdf1.alldatasheet.com/datasheet-pdf/view/250080/ANPEC/APW7137.html |
| t1d:
Contact the manufacturer and ask them for dealer information: http://www.anpec.com.tw/Contact.aspx?lang=en |
| SiliconWizard:
The LT1935 seems a pretty close fit and is pin-to-pin compatible: https://www.analog.com/en/products/lt1935.html The feedback voltage is slightly higher though (typical: +2.8%), so you may have to tweak the feedback resistors' values depending on the voltage output accuracy you're targetting. |
| wraper:
MIC2288 would do the job. https://eu.mouser.com/datasheet/2/268/mic2288-778719.pdf. You could also use TPS61040-Q1 http://www.ti.com/lit/ds/symlink/tps61040-q1.pdf if it's not heavily loaded. |
| Navigation |
| Message Index |