Electronics > Projects, Designs, and Technical Stuff

ALTIUM 20 BUS with DIFFERENTIAL LINE

(1/1)

diego.tagnani:
Hi everyone. I have a big problem with an ALTIUM project.
I have a hierarchical block with differential ports. It is repeated 12 times.
These differential lines must go on connector.
The bus joins all the lines of the block with the name SiPM_K or A [1..12]. For the differential lines on the connector use _P or _N.
The compiler gives me an error, looks for the twisted pair on the name of the bus net and fails to match the two lines of the twisted pair.
I attach the schematics section and error line
Can anyone tell me how I can solve the problem?
Thanks for help.

voltsandjolts:
Please do not double post.
You put the same query here:
https://www.eevblog.com/forum/projects/altium-differential-signals-harnesses-and-net-labeling/msg3217748/#msg3217748
Also, you should use the Altium board on this forum, here:
https://www.eevblog.com/forum/altium/

New topic here:
https://www.eevblog.com/forum/altium/altium-20-bus-with-differential-line-252736/

Mods: please delete/lock this topic.

Navigation

[0] Message Index

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod