| Electronics > Projects, Designs, and Technical Stuff |
| Analog Disovery as Audio Analyzer |
| << < (11/32) > >> |
| jaxbird:
Example of how to read the THD+N vs Power chart, lots of information can be obtained from a plot like this: |
| jaxbird:
OK, here is a download link: http://www.thestuffmade.com/audioanalyzersuite/publish.htm I'm interested in knowing about any bugs you find, pm me or just post here in this thread. I haven't fool proofed the software yet, so if you write e.g. "dave" in start frequency, it will likely blow up. Or if you try run multiple measurements at the same time it will blow up, but in general it should be usable. I am only able to test with my version of the Analog Discovery, so any reports on compatibility are appreciated. Note: the spectrum analyzer is not yet implemented. If that annoys you, I can hide the tab. Feature should be available before new year. |
| jaxbird:
Connections part1: |
| jaxbird:
IMD measurement connection: |
| jaxbird:
Output Impedance: |
| Navigation |
| Message Index |
| Next page |
| Previous page |