Electronics > Projects, Designs, and Technical Stuff
Analog switch suggestion
(1/1)
ali_asadzadeh:
Hi,
For switching two -+ 5V signals to an ADC input, I should use an analog switch, I have a board with the TS5A3160 part on it,I want to know if you know some part with this foot print to be able to accept -+5V as analog signal, any suggestions?
moffy:
The TS12A4516 & TS12A4517 use up to +/-6v supplies and could be suitable.
ali_asadzadeh:
Thanks moffy
Navigation
[0] Message Index
Go to full version