Author Topic: anyone know this connector?  (Read 1311 times)

0 Members and 1 Guest are viewing this topic.

Offline jeroen79Topic starter

  • Frequent Contributor
  • **
  • Posts: 529
anyone know this connector?
« on: March 01, 2019, 08:27:55 pm »
Does anyone know this conenctor?
It looks like a Molex Micro-fit but instead of 3.0 mm pitch it is 2.7 mm.






I need a 2x2 plug with female crimpcontacts.
 

Offline aamirchef135

  • Newbie
  • Posts: 3
Re: anyone know this connector?
« Reply #1 on: March 01, 2019, 08:44:10 pm »
It is dishwashing machine main  PCB Jake I think I have many of them need?

Sent from my SM-G935F using Tapatalk

 

Offline coromonadalix

  • Super Contributor
  • ***
  • Posts: 6998
  • Country: ca
Re: anyone know this connector?
« Reply #2 on: March 01, 2019, 10:16:48 pm »
are you sure theyre not 3mm ce3ntered pins ??

Micro MATE-N-LOK 3 mm Connector System ??
 

Offline DaJMasta

  • Super Contributor
  • ***
  • Posts: 2392
  • Country: us
    • medpants.com
Re: anyone know this connector?
« Reply #3 on: March 01, 2019, 10:32:28 pm »
Didn't check all the angles to the individual pin shrouds, but appears to be a standard 24 pin ATX power supply connector?




Looks like these are 4.2mm pitch, though.
« Last Edit: March 01, 2019, 10:34:33 pm by DaJMasta »
 

Offline jeroen79Topic starter

  • Frequent Contributor
  • **
  • Posts: 529
Re: anyone know this connector?
« Reply #4 on: March 01, 2019, 11:14:46 pm »
The pitch is definitely 2.7 mm.
But the similarity to the Molex 3.0 mm and 4.2 mm is striking.

But I can't find much when looking for this.
Anyone know suitable search terms?

It comes from an old Nokia carkit.
Maybe something made specifically for them?
« Last Edit: March 01, 2019, 11:16:52 pm by jeroen79 »
 

Offline coromonadalix

  • Super Contributor
  • ***
  • Posts: 6998
  • Country: ca
Re: anyone know this connector?
« Reply #5 on: March 01, 2019, 11:22:09 pm »
could you try another picture of the characters on the side  pa66 something ??

i think we use this connector in one of our machine, its an sub assembly we install in it,  not in my department  but ill check it
 

Offline tsman

  • Frequent Contributor
  • **
  • Posts: 599
  • Country: gb
Re: anyone know this connector?
« Reply #6 on: March 01, 2019, 11:53:37 pm »
could you try another picture of the characters on the side  pa66 something ??
PA66 means Polyamide 66 i.e. Nylon.
 

Offline jeroen79Topic starter

  • Frequent Contributor
  • **
  • Posts: 529
Re: anyone know this connector?
« Reply #7 on: March 02, 2019, 12:57:49 am »
could you try another picture of the characters on the side  pa66 something ??

i think we use this connector in one of our machine, its an sub assembly we install in it,  not in my department  but ill check it
One side says:
>PA66/6<
The other side says:
China
TO 12

On the top and bottom pins 1, 12, 13 and 24 are marked.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf