Electronics > Projects, Designs, and Technical Stuff

Aspect ratio of oscilloscope displays

<< < (4/6) > >>

Kleinstein:
With more channels one also need space in the vertical direction, so especially with 4 channels a wide but flat display could be more of a problem.

SilverSolder:

The high end scopes all seem to come with a nice big screen.  If the screen is big enough, the aspect ratio may be less important.

NiHaoMike:
What I would like to see is a scope that uses a HDMI display at 1440p or more. The extra resolution really makes a difference with many channels and longer captures.

SilverSolder:

--- Quote from: NiHaoMike on July 10, 2020, 01:29:14 pm ---What I would like to see is a scope that uses a HDMI display at 1440p or more. The extra resolution really makes a difference with many channels and longer captures.

--- End quote ---

While you are under 40 and your eyesight is keen, the high resolution solution is good!  -  once past 50, most people will prefer a bigger screen, easier to see.

Renate:
The higher display resolution, higher aspect ratio of the USB scopes is what I like.
But the Hantek scope I have has a GUI out of the 1990's (and it's not in Sigrok.)
So I'm working on writing my own.
Yes, it has popup dialogs, but it also has enough hot keys and everything works with the scroll wheel too.
Shown: why you should use pullups on I²C. :P

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod