100kHz frequency PWM from Arduino

[radhika]

Hello,
I am working on project and I need 100kHz from the Arduino. I have tried building code but I am not getting anything when I checked in proteus..
Here is the code,


void setup()
{
  pinMode (5, OUTPUT);
  pinMode(6, OUTPUT);
  TCCR0A = 0;
  TCCR0B = 0;
  TCCR0A = 0b01010011;
  TCCR0B = 0b00001010;//WGM02= 1(Pin 5 is disconnected)
  OCR0A = 9; //Control value of 100kHz, N = 8
}

void loop()
{
  analogWrite(6, 206)// 81% duty cycle;
}

I am using Proteus for checking output. As shown in the attached picture I an unable to get output at pin 6. Guide me for the circuit if I have attached to the wrong pin and the code.
PS: Apologies for the late reply.
https://postimg.cc/image/g84qnrsrr/