« previous next »
Pages: [1]   Go Down

Author Topic: ATX PSU mod to charge Boat/RV battery bank @ 13.6vdc 40a  (Read 1404 times)

0 Members and 1 Guest are viewing this topic.

Offline yamajasonTopic starter

  • Newbie
  • Posts: 7
ATX PSU mod to charge Boat/RV battery bank @ 13.6vdc 40a
« on: April 14, 2014, 03:30:48 am »
I know there have been instructables and various other ATX PSU mod to charge Boat/RV battery bank @ 13.6vdc 40a...

But, I have not found one with Constant Current (charge current limiting) that will lower the output voltage / limiit output current within the PSU's 12v rail capabilities.  I'm thinking a current shunt -> feedback circuit that outputs to the PSU's voltage sense wire.

Any suggestions?
Logged
 

Offline yamajasonTopic starter

  • Newbie
  • Posts: 7
Re: ATX PSU mod to charge Boat/RV battery bank @ 13.6vdc 40a
« Reply #1 on: April 20, 2014, 04:37:29 pm »
Any ideas?
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee