| Electronics > Projects, Designs, and Technical Stuff |
| Best Quality PCB Manufacturer for PCB Front Panels |
| (1/2) > >> |
| MarcusS:
What is the consensus for the best PCB Manufacturer for PCB front panels. I find I'm getting dust in the solder mask and scratches on some boards when I have tried PCBWay and JLCPCB. I'm aiming for really high quality flawless PCBs in this instance. |
| djacobow:
Following. Also who does the "best" silk. I'm mostly using pcbway and my biggest gripe has been sloppy and poorly registered silkscreen. |
| Ysjoelfir:
I prefer to pay a bit more for not having to complain at all, which is why I order my PCBs from Würth www.wedirekt.com/en/ or Ringler https://www.ringler.de . |
| MarcusS:
I will give wurth and ringler a try. Between the scratches, lumpy soldermask with embedded dust and ordinary silkscreen ive had so far, its been very hard to have a fabulously looking pcb front panel for my projects. |
| Warhawk:
Try Aisler.de |
| Navigation |
| Message Index |
| Next page |