Electronics > Projects, Designs, and Technical Stuff
Blue Pill Thermometer project, ready to run binary. Uses a LMT01 sensor.
(1/1)
techman-001:
Hi all,
This Forth project uses fixed point arithmetic to calculate the temperature in Degrees C or Degrees F to one decimal place either from a serial terminal command or a push button press. It has some extra features including switchable USB/USART2 terminal access, and a MCU “Device Electronic Signature” reader.
It contains a ready to run binary for a 64KB Flash version of the STM32F103 Cortex-M3 MCU as used in the Blue Pill ( and other cheap boards) and boots from USB at power up with a virtual terminal.
Connect the few components shown in the schematic to read the temperature.
Details:
https://mecrisp-stellaris-folkdoc.sourceforge.io/project-stm32f103-lmt01.html#stm32f103-lmt01
Binary:
https://sourceforge.net/projects/mecrisp-stellaris-folkdoc/files/ae9236b921613c07b1967f21ff20ee97.tar.gz/download
Navigation
[0] Message Index
Go to full version