Electronics > Projects, Designs, and Technical Stuff

Building controller for slow brushless hydraulic pump?

<< < (3/3)

Renate:

--- Quote from: rhodges on August 20, 2020, 08:49:30 pm ---I want a feed rate of probably 10 to 50 grams per minute.
--- End quote ---

--- Quote from: rhodges on August 22, 2020, 09:10:17 pm ---The feed is stated at 50cc per minute, which is probably much higher than what I want.
--- End quote ---
The density of used motor oil is 0.93 gm/cc.
50 gm / (0.93 gm/cc) = 53.8 cc.

Still, I take back this suggestion.
This is a piston pump and I don't think that it will really be what you want.
And it's probably fed by an AC motor.

You want continuous delivery.

Or how about using the cheapest (automotive) oil pump that you can find on ebay?
https://www.ebay.com/itm/GM-Oil-Pump-1965-1990-260-307-350-400-425-455-NEW/122292535644

Navigation

[0] Message Index

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod