Electronics > Projects, Designs, and Technical Stuff
Can anyone help identify these connectors
GreyArea:
Hi, I'm hoping someone may look at these and recognise them off the bat.
The large connecter I'm reasonably sure is a JST XH, it measures 10x5.8mm on the outside edges and seems to fit a 2.5/2.54 pitch.
The small connector I'm less sure about. The pitch seems closer to 1.5mm and the outside edges are 8x4.5mm
Thanks
coromonadalix:
seems xh series ?? for the 2st pictures
OM222O:
They're JST connectors, depending on the pitch (spacing between the conductors) it gets a series name like SH or XH. try to measure with a caliper or if that's not an option, take a photo next to a ruler and measure with a software (I personally use fusion 360).
GreyArea:
Thanks, yes I agree the large one does look like an XH 2.54.
Still stumped on the smaller one, as I said, the pitch seems closer to 1.5mm but I've looked though this list up to 2.5mm and can't find a match.
http://www.jst-mfg.com/product/search_e.php?type=1&id=1&page=1
Maybe I should just desolder them and put known ones in.
Monkeh:
JST XH and PH.
Navigation
[0] Message Index
[#] Next page
Go to full version