Electronics > Projects, Designs, and Technical Stuff
Crimped pins soldered to the board?
(1/1)
fabiodl:
This "connector" has crimped pins which are directly soldered to the board.
Does someone know it? The pitch appears to be 3.96mm (it's slightly less than 4mm)

fabiodl:
If it may help, the other connectors used seem to be JST. the cable is terminated by a JST vh, and another connector on the board is a JST XH
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod