Electronics > Projects, Designs, and Technical Stuff

Crimped pins soldered to the board?

(1/1)

fabiodl:
This "connector" has crimped pins which are directly soldered to the board.
Does someone know it? The pitch appears to be 3.96mm (it's slightly less than 4mm)

fabiodl:
If it may help, the other connectors used seem to be JST. the cable is terminated by a JST vh, and another connector on the board is a JST XH

Navigation

[0] Message Index

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod