Electronics > Projects, Designs, and Technical Stuff

Cat5 / 5e / 6 Wiring Idea

<< < (6/6)

RayJones:
Yep, that wheel has already been invented, blown a flat, seized the bearings, sheared the wheel studs, and happily chucked off the side of the road.

#1 rule, learn from your own mistakes.
#2 rule, observe and learn from others mistakes to avoid rule 1.

Jimmy:
op

You can do that today with old technology on a bnc network or token ring. Your idea is not origional. They allready have a cat 6 passthrough devices in all our voip phones at work. Conncet pc to phone then router.

Jon Chandler:

--- Quote from: RayJones on January 12, 2011, 09:49:48 pm ---
#1 rule, learn from your own mistakes.
#2 rule, observe and learn from others mistakes to avoid rule 1.

--- End quote ---

I like to say that there are plenty of mistakes to be made.  There's no reason to re-use an old one! :)

Navigation

[0] Message Index

[*] Previous page