Electronics > Projects, Designs, and Technical Stuff
center tap transformer project
(1/1)
grifftech:
the transformer is 24 volts with a 12 volt center tap, will this work?
MarkF:
Yes.  But, I would add a few more components.  A couple protection diodes, output capacitor and a LED. 
The LED provides a power 'ON' indication and more importantly a minimum load for the regulator.

   


If you care to have a PCB made, it might look like this.

   
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod