Electronics > Projects, Designs, and Technical Stuff
chinese psu kit
<< < (5/5)
soldar:

--- Quote from: m3vuv on April 27, 2019, 12:29:45 am --- what is that going to achieve the track does the same as the wire,seems pointless
--- End quote ---


--- Quote from: m3vuv on April 29, 2019, 10:13:10 am --- still no answers to my original question!,ive changed the opamps already to higer voltage items!.,all the answers so far are not very helpfull!,always seem to go off track!.
--- End quote ---


--- Quote from: m3vuv on April 29, 2019, 06:53:27 pm --- dont you guys read?,

.,ppl not reading the post properly or reading too much into it make this forum hard going!!
--- End quote ---

You might try adjusting your attitude if you want to ask for people's help.

With an attitude like that I am not surprised even your electronics refuse to cooperate.
OM222O:
all the shitty attitude aside, he's been into electronics for 40+ years and still doesn't know lasers need to be modulated and a basic CC PSU (a cheapy chinese one at that) isn't gonna cut the mustard  :-DD

and it goes from powering fans for a 50A bridge  :bullshit: to powering a laser in a few posts  :-// :palm:

first you should know what your main goal is  :scared:
also as pretty much everyone pointed out, this kit is running at it's limits which means upgrading one part doesn't do anything and you must upgrade EVERYTHING for it to be any better ... you get to keep the PCB which still seems to have issues and others pointed out  :rant:

also everyone pointed out buying / building a better PSU which you said you have no interest in  :-BROKE the answer is pretty obvious here  |O
m3vuv:
jeez i give up,its like trying to tech your granny to suck eggs!
Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod