Author Topic: Clock from spares  (Read 577 times)

0 Members and 1 Guest are viewing this topic.

Offline NivagSwerdnaTopic starter

  • Super Contributor
  • ***
  • Posts: 2507
  • Country: gb
Clock from spares
« on: February 01, 2019, 02:31:40 pm »
I had a few spare bits... a clock board from a previous nixie project, which is basically an Arduino Uno with DS3231 RTC, LV and HV supplies..
... combined with an 8 digit LED module I had in the junk and a LASER cut case.
 ;)
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf