Electronics > Projects, Designs, and Technical Stuff
Clock pulse generator
<< < (4/4)
Benta:

--- Quote from: OM222O on July 12, 2019, 02:40:01 pm ---How about using a programmable PLL? They are available in quite a large frequency range.

--- End quote ---

Overkill IMHO.
edavid:
You could buy one of these 5.76MHz oscillators:

https://www.ebay.com/itm/MF-Electronics-Corp-M1200-5-76-MHz-Crystal-Oscillator-Lot-of-2-/123058667912

Then divide by 1024 with a 74HCT4020, 74HCT4040, or 74HCT4060 to get 5.625kHz.

(Or you could tell people what you are actually doing, and maybe get even better suggestions.)



tggzzz:

--- Quote from: B J on July 11, 2019, 02:37:10 am ---Looking for ideas for a pulse generator.  I want as close as possible to 5.626 KC, or some multiple, as I can get.  Looking at crystals and resonators available through normal outlets and just haven't found one I am happy with.  This will be built into another piece of equipment.     Looking for ideas.   TNX

--- End quote ---

Since you think in of, can I suggest that a PUJT oscillator will meet your spec and also use contemporary technology.

PUJT is "programmable injunction transistor".
Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod