Electronics > Projects, Designs, and Technical Stuff
Clock pulse generator
Benta:
--- Quote from: OM222O on July 12, 2019, 02:40:01 pm ---How about using a programmable PLL? They are available in quite a large frequency range.
--- End quote ---
Overkill IMHO.
edavid:
You could buy one of these 5.76MHz oscillators:
https://www.ebay.com/itm/MF-Electronics-Corp-M1200-5-76-MHz-Crystal-Oscillator-Lot-of-2-/123058667912
Then divide by 1024 with a 74HCT4020, 74HCT4040, or 74HCT4060 to get 5.625kHz.
(Or you could tell people what you are actually doing, and maybe get even better suggestions.)
tggzzz:
--- Quote from: B J on July 11, 2019, 02:37:10 am ---Looking for ideas for a pulse generator. I want as close as possible to 5.626 KC, or some multiple, as I can get. Looking at crystals and resonators available through normal outlets and just haven't found one I am happy with. This will be built into another piece of equipment. Looking for ideas. TNX
--- End quote ---
Since you think in of, can I suggest that a PUJT oscillator will meet your spec and also use contemporary technology.
PUJT is "programmable injunction transistor".
Navigation
[0] Message Index
[*] Previous page
Go to full version