| Electronics > Projects, Designs, and Technical Stuff |
| concept from scratch for a camera slider |
| (1/1) |
| Johannsen:
Hi, I just finished building the hardware for a camera slider. I need it to record timelapse videos. The slider should move e.g. 1cm wait 5min take a photo, repeat, etc. Attached a first plan for the control. I was thinking of using a samd21 of an arduino zero and also program it with the arduino ide. In the final stage I would like to control it with a remote, maybe connected with rfm95 or nrf24 modules. I'm considering using a DS3231 or the internal rtc of the samd, for driving the dc gear motor a l298n What do you think of the concept (flow diagram)? Is such a diagram usually more detailed or what can I improve? Usually I just started to program but thought it would be a good idea to draw a plan first. |
| Navigation |
| Message Index |