Electronics > Projects, Designs, and Technical Stuff

concept from scratch for a camera slider

(1/1)

Johannsen:
Hi,

I just finished building the hardware for a camera slider. I need it to record timelapse videos. The slider should move e.g. 1cm wait 5min take a photo, repeat, etc.
Attached a first plan for the control.
I was thinking of using a samd21 of an arduino zero and also program it with the arduino ide.
In the final stage I would like to control it with a remote, maybe connected with rfm95 or nrf24 modules.
I'm considering using a DS3231 or the internal rtc of the samd, for driving the dc gear motor a l298n
What do you think of the concept (flow diagram)? Is such a diagram usually more detailed or what can I improve? Usually I just started to program but thought it would be a good idea to draw a plan first.

Navigation

[0] Message Index

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod