Where to get 3x2 IDC wire to board connector inm2mm pitch?

[DTJ]

Has anyone any ideas on who makes a 6W (3 × 2 row) ribbon cable IDC connector in 2mm pitch?

I've searched most places I can think of and can not find anything.

I have an IP67 panel mounting USB connector that has the 3x2 @ 2mm hole pattern on a small PCB sticking out the back.  Soldering individual wires on hundreds of these will be a PITA.

Someone must make one, even a 4x2 at a pinch.


This style but in 3x2 @ 2mm pitch.

https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcTs4MC1BkiyjleEhuwPbB3jtMprZLL8wjJAuQ&usqp=CAU


Thanks.

[tooki]

Took me 2 minutes to find these on Digi-Key*: https://www.digikey.ch/en/products/detail/amphenol-icc-fci/89361-106LF/1535464

That one’s in stock, 3 more are out of stock at the moment, and 13 other types available for special order. Match to a common 2mm header.


*Connectors > rectangular connectors, free hanging > filter by part status (active), pitch (2mm), positions (6), rows (2), contact type (female) and cable type (ribbon).

[gamalot]

The only one I can find that matches your requirements is the Samtec TCMD-03-01, unfortunately none of the distributors have it in stock. 

https://octopart.com/tcmd-03-01-samtec-16812359

[DTJ]

Took me 2 minutes to find these on Digi-Key*: https://www.digikey.ch/en/products/detail/amphenol-icc-fci/89361-106LF/1535464

That one’s in stock, 3 more are out of stock at the moment, and 13 other types available for special order. Match to a common 2mm header.


*Connectors > rectangular connectors, free hanging > filter by part status (active), pitch (2mm), positions (6), rows (2), contact type (female) and cable type (ribbon).

Thanks Tooki. I found those we have limited space so need the direct solder to board style.

[DTJ]

The only one I can find that matches your requirements is the Samtec TCMD-03-01, unfortunately none of the distributors have it in stock. 

https://octopart.com/tcmd-03-01-samtec-16812359

Thanks Gamalot - you are on the money with that one. I'm conversing with Samtec now about getting some. They will have some in stock in the near future!

Cheers.