| Electronics > Projects, Designs, and Technical Stuff |
| Connecting a PCB to a slotted enclosure |
| << < (4/4) |
| Wendy_Preston:
Hi Dave, I spotted the link you posted to our Horizontal Spring Contacts (S1951-46R) - we also have an option without the slot in the mating contact, which gives it a slightly higher force (S1941-46R). It's difficult to say if it's going to achieve exactly what you are aiming for, but it's certainly an option that I think is worth considering. It will be important to ensure it's making good electrical contact with the area on the case where you choose to locate the interface. You can request samples from our website - go to the product page, load up the sample basket, then checkout. You can also see stock at all our authorised distributors there. Do let me know if I can be of any assistance. |
| IconicPCB:
Consider alodining instead of anodising |
| Dave:
--- Quote from: Wendy_Preston on January 10, 2019, 11:12:21 am ---Hi Dave, I spotted the link you posted to our Horizontal Spring Contacts (S1951-46R) - we also have an option without the slot in the mating contact, which gives it a slightly higher force (S1941-46R). It's difficult to say if it's going to achieve exactly what you are aiming for, but it's certainly an option that I think is worth considering. It will be important to ensure it's making good electrical contact with the area on the case where you choose to locate the interface. You can request samples from our website - go to the product page, load up the sample basket, then checkout. You can also see stock at all our authorised distributors there. Do let me know if I can be of any assistance. --- End quote --- Attempted to order some samples from your website on the day that you wrote this message, no response has been received from your team in two weeks. ::) |
| Wendy_Preston:
--- Quote from: Dave on January 24, 2019, 02:24:41 pm --- --- Quote from: Wendy_Preston on January 10, 2019, 11:12:21 am ---Hi Dave, I spotted the link you posted to our Horizontal Spring Contacts (S1951-46R) - we also have an option without the slot in the mating contact, which gives it a slightly higher force (S1941-46R). It's difficult to say if it's going to achieve exactly what you are aiming for, but it's certainly an option that I think is worth considering. It will be important to ensure it's making good electrical contact with the area on the case where you choose to locate the interface. You can request samples from our website - go to the product page, load up the sample basket, then checkout. You can also see stock at all our authorised distributors there. Do let me know if I can be of any assistance. --- End quote --- Attempted to order some samples from your website on the day that you wrote this message, no response has been received from your team in two weeks. ::) --- End quote --- Dave, I'm so sorry, I only just managed to get back on the forum! :palm: Totally not an excuse, but our website is having the occasional glitch that we are having real problems pinning down. If you still have had no response, please do email the Samples team on samples@harwin.co.uk with all the info you put in the form (if you got an automated response from the website, you can send that), and they will get onto that for you. Once again, I can only apologise :-[ . We're at the start of redesigning the website, brand new rebuild, as we have a few glitchy things like this that just refuse to get pinned down. Plus it's due for a refresh anyway. :horse: |
| Navigation |
| Message Index |
| Previous page |