EEVblog Electronics Community Forum

Electronics => Projects, Designs, and Technical Stuff => Topic started by: richard1991 on May 10, 2017, 10:59:57 am

Title: Connecting female sockets to veroboard pins
Post by: richard1991 on May 10, 2017, 10:59:57 am

Hi. I've used veroboard pins on a veroboard so I can connect flying leads or jumper wires.  I went and ordered some breadboard jumper wires with female sockets on the end, but they do not fit the 1mm diameter veroboard pins. So, I need some jumper leads with female sockets that fit the 1mm diameter pins.

Is anyone here buying such a product, or identified a supplier?  I've not turned up anything so far.  Thanks.

Title: Re: Connecting female sockets to veroboard pins
Post by: tooki on May 10, 2017, 04:34:45 pm

See https://www.eevblog.com/forum/projects/please-identify-this-connector/ (https://www.eevblog.com/forum/projects/please-identify-this-connector/)

In there, I have pix and a manufacturer link, might be what you're looking for.