« previous next »
Pages: [1]   Go Down

Author Topic: Best Quality PCB Manufacturer for PCB Front Panels  (Read 1416 times)

0 Members and 1 Guest are viewing this topic.

Offline MarcusSTopic starter

  • Regular Contributor
  • *
  • Posts: 55
  • Country: au
Best Quality PCB Manufacturer for PCB Front Panels
« on: July 01, 2019, 01:59:47 pm »
What is the consensus for the best PCB Manufacturer for PCB front panels. 
I find I'm getting dust in the solder mask and scratches on some boards when I have tried PCBWay and JLCPCB. 
I'm aiming for really high quality flawless PCBs in this instance.
Logged
 

Offline djacobow

  • Super Contributor
  • ***
  • Posts: 1164
  • Country: us
  • takin' it apart since the 70's
Re: Best Quality PCB Manufacturer for PCB Front Panels
« Reply #1 on: July 01, 2019, 04:06:01 pm »
Following. Also who does the "best" silk. I'm mostly using pcbway and my biggest gripe has been sloppy and poorly registered silkscreen.
Logged
 

Offline Ysjoelfir

  • Frequent Contributor
  • **
  • Posts: 543
  • Country: de
Re: Best Quality PCB Manufacturer for PCB Front Panels
« Reply #2 on: July 01, 2019, 04:15:01 pm »
I prefer to pay a bit more for not having to complain at all, which is why I order my PCBs from Würth www.wedirekt.com/en/ or Ringler https://www.ringler.de .
Logged
Greetings, Kai \ Ysjoelfir
 

Offline MarcusSTopic starter

  • Regular Contributor
  • *
  • Posts: 55
  • Country: au
Re: Best Quality PCB Manufacturer for PCB Front Panels
« Reply #3 on: July 03, 2019, 03:35:04 pm »
I will give wurth and ringler a try.  Between the scratches, lumpy soldermask with embedded dust and ordinary silkscreen ive had so far, its been very hard to have a fabulously looking pcb front panel for my projects.
Logged
 

Offline Warhawk

  • Frequent Contributor
  • **
  • Posts: 834
  • Country: 00
    • Personal resume
Re: Best Quality PCB Manufacturer for PCB Front Panels
« Reply #4 on: July 03, 2019, 08:10:24 pm »
Try Aisler.de
Logged
 

Offline thinkfat

  • Supporter
  • ****
  • Posts: 2158
  • Country: de
  • This is just a hobby I spend too much time on.
    • Matthias' Hackerstübchen
Re: Best Quality PCB Manufacturer for PCB Front Panels
« Reply #5 on: July 04, 2019, 09:33:12 am »
Quote from: Warhawk on July 03, 2019, 08:10:24 pm
Try Aisler.de
They only offer a matte green solder mask, though. Artistic choices are somewhat limited therefore.

Gesendet von meinem Nokia 6.1 mit Tapatalk

Logged
Everybody likes gadgets. Until they try to make them.
 

Offline martin1454

  • Regular Contributor
  • *
  • Posts: 95
  • Country: dk
Re: Best Quality PCB Manufacturer for PCB Front Panels
« Reply #6 on: July 04, 2019, 09:50:41 am »
Never had any issue with https://uk.beta-layout.com/pcb/ for prototypes
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee