Author Topic: ULN2003A replacement  (Read 6065 times)

0 Members and 1 Guest are viewing this topic.

Offline FreighternutTopic starter

  • Regular Contributor
  • *
  • Posts: 54
  • Country: nz
ULN2003A replacement
« on: September 21, 2011, 01:37:50 am »
Hi,

Does anybody know of a more modern replacement for the venerable ULN2003A 7 channel Darlington driver.

I am starting development of a general purpose high current (500ma per channel) driver board to be driven by SPI or I2C. The board will be based on 3.3 volt logic so the driver needs to be compatible with this voltage on the input side. I will be opto isolating some channels and including a few higher current (1 - 2 Amp) outputs as well.

I have spent quite a bit of time Googling for this, but have not yet found any drivers readily available.

Thanks.
Save the earth - Travel the world by Container Ship! Almost zero carbon foot print
 

Offline PeterG

  • Frequent Contributor
  • **
  • Posts: 832
  • Country: au
Testing one two three...
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf