Electronics > Projects, Designs, and Technical Stuff
Deoxit and Brake Cleaner
<< < (4/4)
T3sl4co1l:
Looks to be basically pressurized canned paint thinner.  Not as aggressive as chlorinated solvents or some ethers, but still not recommended for free use around electronics.

Tim
m3vuv:
ive used petrol lighter fluid on wafer switches before,it seems to work well!
Zero999:

--- Quote from: T3sl4co1l on October 16, 2019, 08:23:00 am ---Looks to be basically pressurized canned paint thinner.  Not as aggressive as chlorinated solvents or some ethers, but still not recommended for free use around electronics.

Tim

--- End quote ---
I've not had any problems with it. It doesn't even attack polystyrene foam, which is generally the first thing to dissolve.
T3sl4co1l:
Hm, that's interesting!

Well, as they say for fabric products -- do a spot test.  Be careful; if it works, it works. :)

Tim
OldEE:
Deoxit in addition to being an effective cleaner is also a good corrosion inhibitor.  Check out the Applied Science video for more information.

The video used the concentrated form of Deoxit Red so how effective the diluted spray version works is unknown.


Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod