Electronics > Projects, Designs, and Technical Stuff
Design for a Homebrew Paint Thickness Tester
<< < (5/5)
StuartA:

--- Quote from: MosherIV on October 02, 2019, 06:51:03 am ---Hi. If you had good results with the inductive approach, why have you stopped?

--- End quote ---

I've not stopped, but I now need to make or source some suitable calibration standards. I quickly found out that the clear plastic strip that I started with is not the same as paint loaded with pigments. There's a learning curve in making them!

In its day, the Banana gauge was probably the best thing around, and may well still be adequate for some work
Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod