Author Topic: Designing, Fabrication and Calibrating EMC magnetic Probe  (Read 1889 times)

0 Members and 1 Guest are viewing this topic.

Offline RebelnationTopic starter

  • Newbie
  • Posts: 5
Designing, Fabrication and Calibrating EMC magnetic Probe
« on: December 05, 2013, 11:58:23 am »
Hey guys,

I need to design, fabricate and calibrate EMC h field magnetic probe (circular design). i need tips on how to do it such as does the area of loop effects the magnetic wave obtained and how do i measure the area, any other formulas or books or anything related to this. what kind of hardware need and how to calibrate it and also is any software available to design it and simulate if possible. Any tips is greatly appreciated and thanks :)
 

Offline qno

  • Frequent Contributor
  • **
  • Posts: 422
  • Country: nl
Re: Designing, Fabrication and Calibrating EMC magnetic Probe
« Reply #1 on: December 05, 2013, 12:55:34 pm »
Check out Application note 118 of Linear Technologies
Why spend money I don't have on things I don't need to impress people I don't like?
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf