| Electronics > Projects, Designs, and Technical Stuff |
| Did I make this right? |
| (1/1) |
| thinkpad4by3:
Hi guys, I made my first schematic and board in Eagle over the last few weeks. I was going to send it off for fab but I figured it would be a good idea to get a second eye on the project to see if I messed anything up the DRC/ERC won't catch or if there is something very wrong with my routing or what not. And the project is a new mainboard for an Atari 2600 using original chips, but added composite and eventually s-video. Link for it here: https://github.com/Thinkpad4by3/AtariPortable |
| Ysjoelfir:
Would you mind posting pictures or a PDF of the project? I highly dislike github and also don't have eagle to open any of your files. |
| thinkpad4by3:
--- Quote from: Ysjoelfir on July 12, 2019, 07:44:33 am ---Would you mind posting pictures or a PDF of the project? I highly dislike github and also don't have eagle to open any of your files. --- End quote --- Sure, I attached the board layout for the top and bottom, along with a full view and schematic. |
| Navigation |
| Message Index |