Author Topic: Did I make this right?  (Read 778 times)

0 Members and 1 Guest are viewing this topic.

Offline thinkpad4by3Topic starter

  • Newbie
  • Posts: 9
  • Country: us
Did I make this right?
« on: July 11, 2019, 04:28:30 pm »
Hi guys,

I made my first schematic and board in Eagle over the last few weeks. I was going to send it off for fab but I figured it would be a good idea to get a second eye on the project to see if I messed anything up the DRC/ERC won't catch or if there is something very wrong with my routing or what not.

And the project is a new mainboard for an Atari 2600 using original chips, but added composite and eventually s-video.


Link for it here: https://github.com/Thinkpad4by3/AtariPortable

 

Offline Ysjoelfir

  • Frequent Contributor
  • **
  • Posts: 543
  • Country: de
Re: Did I make this right?
« Reply #1 on: July 12, 2019, 07:44:33 am »
Would you mind posting pictures or a PDF of the project? I highly dislike github and also don't have eagle to open any of your files.
Greetings, Kai \ Ysjoelfir
 

Offline thinkpad4by3Topic starter

  • Newbie
  • Posts: 9
  • Country: us
Re: Did I make this right?
« Reply #2 on: July 12, 2019, 10:44:22 pm »
Would you mind posting pictures or a PDF of the project? I highly dislike github and also don't have eagle to open any of your files.

Sure, I attached the board layout for the top and bottom, along with a full view and schematic.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf