EEVblog Electronics Community Forum
Electronics => Projects, Designs, and Technical Stuff => Topic started by: JoelStienlet on September 21, 2019, 02:28:37 pm
-
Hello everybody,
I don't see many differences between the MAX3096 and MAX3094, except the enable logic, on the max3096 all four receivers are enabled/disabled at the same time, whereas on the max3094 they're grouped in two pairs. But except this I can't spot any major difference. I find it strange that Maxim published two separate datasheets for such very similar devices! So I thought, perhaps there is another difference that I missed?
Thank you!