DIY Modular Synthesizer

[Len]

Here's a prototype for a digital voice module that I've been working on for a while. It still has a long way to go.

[Len]

Here's a digital effects module: https://github.com/Len42/Synth/tree/main/modules/FX

[Len]

Here's a unity-gain mixer / precision adder module: https://github.com/Len42/Synth/tree/main/modules/Adder

[Len]

Here's another small mixer module: https://github.com/Len42/Synth/tree/main/modules/Mixer1

[Len]

Here's another filter module, different from the first one: https://github.com/Len42/Synth/tree/main/modules/VCF-SV

[Len]

This one has been a long time in the making. It's a digital FM voice module based on an RP2040 microcontroller board. Writing the firmware was a lot of work, and I also had to write patch-editing software.

Github: https://github.com/Len42/Dexy

[Len]

Now that I have finished the final module* here's the state of my homebrew Eurorack system after about 2 years of work.

* There is no such thing as a final module.

[Len]

Here's the module after the final module - it's a 4-channel muting module:
https://github.com/Len42/Synth/tree/main/modules/Switches

[cncjerry]

We need some sound!

[Len]

We need some sound!

One of these days, when I've figured out how to record stuff with a DAW.

[Len]

This is the FINAL final module for my homebrew Eurorack system (following the previous final module, which was after the first final module). It's a dual filter - not voltage-controlled, fingers only. 👌
https://github.com/Len42/Synth/tree/main/modules/Filter2

[Len]

You thought it was finished? HA! I only had one LFO, and I needed more LFO, so I made a dual analog LFO in a 4HP module.
https://github.com/Len42/Synth/tree/main/modules/LFO-Analog

[Len]

OK, this really must be the last module I make because I have run out of space in my case! It's a multi-function module so it really should be the last one that I need.