Electronics > Projects, Designs, and Technical Stuff

DIP version of voltage level converter SN74LVC1T45 ?

<< < (6/6)

FrankBuss:
Fully working example with a FRAM memory chip with 3.3 V, where the SPI port runs at 10 MHz, and an ATmega328, running at 5 V:



Works without problems, problem solved. Yellow is the clock signal from the microcontroller and green the MISO signal from the memory, measured at the microcontroller input:

Navigation

[0] Message Index

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod