Electronics > Projects, Designs, and Technical Stuff
DIY cheap powerbank (technical suggestions R welcome !)
ym58:
--- Quote from: crazyguy on August 10, 2016, 08:11:28 am ---(3) according to the package, I would guess it is a IP5108 chip
https://item.taobao.com/item.htm?id=534722661076&ns=1&abbucket=5#detail
--- End quote ---
I am very interested in the IP5109, but don't feel like making my own PCB around this chip :phew:
Do you know of any powerbank that would use this chip (as the Miller ML-106 with the IP5108) ?
crazyguy:
--- Quote from: ym58 on August 10, 2016, 10:56:24 am ---
--- Quote from: crazyguy on August 10, 2016, 08:11:28 am ---(3) according to the package, I would guess it is a IP5108 chip
https://item.taobao.com/item.htm?id=534722661076&ns=1&abbucket=5#detail
--- End quote ---
I am very interested in the IP5109, but don't feel like making my own PCB around this chip :phew:
Do you know of any powerbank that would use this chip (as the Miller ML-106 with the IP5108) ?
--- End quote ---
IP5109 chip in operation is very hot, > 115C
IP5109 demo board review
http://www.chongdiantou.com/thread-1731-1-1.html
no idea which powerbank use this chip
Miller taobao shop
https://miller162.taobao.com/
ML-106 V1.0 (IP5206)
https://item.taobao.com/item.htm?id=534400802077
Charger ML-102 V9.0 2015
use IP5206
http://lygte-info.dk/review/Review%20Charger%20ML-102%20V9.0%202015%20UK.html
ML-102 V9.0 Power Bank (Russian)
http://mysku.ru/blog/china-stores/35821.html
IP5108 and IP5206 are pin-to-pin compatible
ym58:
--- Quote from: crazyguy on August 10, 2016, 02:17:53 pm ---IP5109 chip in operation is very hot, > 115C
IP5109 demo board review
http://www.chongdiantou.com/thread-1731-1-1.html
no idea which powerbank use this chip
--- End quote ---
---
I'd like to test this IP5109 board and use chunks of this :
here :
and there :
What do you think ?
Where can I purchase one ?
crazyguy:
use a large heat sink will increase the size of the powerbank
I don't think you can purchase this demo board anywhere, send a email to the IC company maybe they would be kind enough to give you a copy for testing
ym58:
--- Quote from: crazyguy on August 11, 2016, 03:50:57 am ---use a large heat sink will increase the size of the powerbank
--- End quote ---
Well it's not so large, the width is only 14mm (0.55 inch) and the height 6mm (0.23 inch) !
And I was thinking I could trim its length according to the hot surfaces it has to be glued on on each side of the PCB ...
--- Quote from: crazyguy on August 11, 2016, 03:50:57 am ---I don't think you can purchase this demo board anywhere, send a email to the IC company maybe they would be kind enough to give you a copy for testing
--- End quote ---
That's what I'll do.
Is Changdiantou a distributor only or the original IC company ?
Apparently, their website is about video rentals ... ?!?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version