Electronics > Projects, Designs, and Technical Stuff
DIY Home Made BGA rework Station
andy3055:
This might help you: https://www.electronics-lab.com/tiny-reflow-controller-v2-features-oled-display/
SOLOway:
andy3055 thank you for the link, but I have long known that project. That project does not have any advantages in comparison with the project on the forum Amperka.ru. These are completely different projects, and they are designed for different purposes. Topic on the forum Amperka.ru for more than three years, we have been using components powered by +5 volts and with TTL signal levels. We are developing both versions with character displays and versions with TFT color LCD 3.2-3.95" 480x320. We have two temperature measurement channels. Our PID library has been converted from fractions to integers, which has a beneficial effect on the speed of calculations, because AtMega168p/328p/2560 do not have a floating-point block.
(andy3055 спасибр вам за ссылку, но мне давно известен тот проект. Тот проект не имеет никаких преимуществ, в сравнении с проектом на форуме Amperka.ru. Это совсем разные проекты, и они предназначены для разных целей. Теме на форуме Amperka.ru уже больше трёх лет, мы используем комплектующие с питанием +5 вольт и с уровнями сигналов TTL. Мы развиваем и версии с символьными дисплеями, и версии с TFT color LCD 3.2-3.95" 480x320. У нас два канала измерения температуры. У нас библиотека PID переведена с дробных на целые числа, что благотворно сказалось на скорости вычислений, потому что AtMega168p/328p/2560 не имеют блока для работы с плавающей запятой.)
You can view the code for one of the versions in the attached file.
You can also watch a video about a different version of the controller, which is also discussed in the topic I told you about: https://www.youtube.com/user/watashisolify/videos
SOLOway:
Project @Watashi from the topic: https://clck.ru/JNqKg
A compilation of video clips: https://www.youtube.com/user/watashisolify/videos
(Проект @Watashi из темы: https://clck.ru/JNqKg
Подборка видеоклипов: https://www.youtube.com/user/watashisolify/videos)
SOLOway:
This version is the most compact, specially optimized for the use of inexpensive components: an arduino Board on AtMega168p / 328p (5v / 16MHz), LCD1602 without i2c, one MAX6675 module, a homemade (or purchased)analog keyboard with 5 buttons, a homemade (or purchased) 3-4-channel relay Board on 12V, 2 fans on 12V.
Here there is only one channel of the upper heater, and the preheater of the mainboards (lower heater) can be used any available, whether it is manual or automatic.
Despite the presence of only the upper heater control channel, the controller has a fairly wide range of functions, and also allows you to plot diagramm the temperature/time in the program on the PC monitor.
When soldering starts, the cooling fan of the triac and controller turns on and the red flashing led turns on.
After soldering is complete, you can turn on and off the external fan to cool the Board you have soldered. (Эта версия самая компактная, специально оптимизируется под использование недорогих комплектующих: плата arduino на AtMega168p / 328p(5v / 16MHz), LCD1602 без i2c, один модуль MAX6675, самодельная (или покупная) аналоговая клавиатура на 5 кнопок, самодельная (или покупная)3-4х-канальная плата реле на 12в, 2 вентилятора на 12в.
Здесь имеется только один канал верхнего нагревателя, а преднагреватель плат (нижний нагреватель) можно использовать любой, имеющийся в наличии, не важно, с ручным он, или с автоматическим управлением.
Несмотря на наличие только канала управления верхним нагревателем, контроллер имеет достаточно широкий набор функций, а также позволяет строить график температура/время в программе на мониторе ПК.
При старте пайки включается вентилятор охлаждения симисторов и контроллера и красный мигающий светодиод.
После завершения пайки можно включать и отключать внешний вентилятор для охлаждения платы, которую вы паяли.)
Detailed information is pinned at the beginning of the code. (Подробная информация закреплена в начале кода.)
SOLOway:
I suggest that everyone read the video materials that were posted on youtube.com those people who built infrared soldering stations based on controllers from the topic on the site's forum Amperka.ru (Я предлагаю всем ознакомиться с видеоматериалами, которые разместили на youtube.com те люди, которые построили инфракрасные паяльные станции на основе контроллеров из темы на форуме сайта Amperka.ru)
I invite all comers to the topic, I will be happy to have a constructive discussion on this resource. I want as many interested people as possible to help develop these projects. Please do not remain indifferent, take part in the development! (Я приглашаю всех желающих в тему, я буду рад конструктивному обсуждению и на этом ресурсе. Я хочу, чтобы как можно больше заинтересованных людей помогали развивать эти проекты. Пожалуйста, не оставайтесь равнодушными, примите участие в разработках!)
Navigation
[0] Message Index
[*] Previous page
Go to full version