Electronics > Projects, Designs, and Technical Stuff
doser pump solutions
<< < (3/3)
patrick1:
for the 555,  you will need too add a component, which is why it is not working in calculator.

a diode is required too charge the capacitor via your pin 6 ? 2 link wire.   stick the diode between pin 7 and pin 6, - with current being aloud too flow in that direction too.

however if you use my circuit, - any 555 timer values will work, - even if your on time is 50/50  or 60/40,  - my circuit will just output a brief pulse in response too any input, and reset itself for the next pulse.  ... so basically you just need a 555 timer set too 10 seconds, - and  the output will go into my pulse circuit,   the output of which, is fed backwards through a zener too flatten it, - or forwards through a short string of diodes too flatten the signal   ....    and the results of that rigmoreall  will go into your drive transistor.

peace.

Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod