| Electronics > Projects, Designs, and Technical Stuff |
| Drawing power from a rectified DC signal from a DC load? |
| << < (3/3) |
| Gracep:
--- Quote from: Kleinstein on April 14, 2020, 09:01:21 pm ---The electronic load can get upset by the dropping voltage. Below some 0.2-1 V the load will not be able sink the current as planed. This can upset the regulation: either cause a drop out - turn off with a error message, more or less significant overshoot when the voltage comes back and probably some error in the average current. http://delicerecipes.com/ It should not cause damage to the load - at least this is the plan and how it should be. Things should better if the is a filter cap after the rectifier, just like i the real circuit. --- End quote --- thanks, i found i very helpful. i'm a newbie and since i'm still learning, that's not very easy for me to find it out all as easy. i'm still having some questions and i was wondering if i could ask you, sir, some questions? anyway, thanks a lot as you already helped |
| Shock:
If you have a question just ask, or post a new thread if it's unrelated. |
| Navigation |
| Message Index |
| Previous page |