Electronics > Projects, Designs, and Technical Stuff
Dropping 100mV exactly
(1/4) > >>
elektrinis:
So I have this project, where I need to drop 100mV (±20mV): from 4.3V to 4.2V.
Current around 50mA, only one-way.
Max Iq= 50μA.
The drop should stay within ±20mV in wide current range, from 1μA to 50mA.
One extra problem: free space is very limited. I have space for maybe single SOT23 package...

Was thinking maybe find an opamp with BJT output with correct rail-to-rail drop, but could not find a suitable one.
Was also thinking about series voltage references and LDOs, but no luck as well.

What are my options??
JPortici:
Check out TS922
elektrinis:

--- Quote from: JPortici on March 12, 2019, 09:49:25 am ---Check out TS922

--- End quote ---
Iq = 3mA ...
JPortici:
uh! i forgot about the Iq
RES:
A difference amplifier (high current >=100mA opamp) plus a multi turn pot or adjustable voltage reference?

AD8603
Navigation
Message Index
Next page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod