| Electronics > Projects, Designs, and Technical Stuff |
| Dummy making a dummy load box |
| << < (4/5) > >> |
| tkamiya:
I just use regular incandescent lights. Parallel a few and it can take quite a bit. Only thing is, it's ohmic value changes depending on how much you put in it. But if you want a dummy dummy load, it's cheap and parts are widely available. |
| schmitt trigger:
--- Quote from: not1xor1 on December 12, 2018, 08:32:41 am ---this is dummier than yours ;D --- End quote --- Nice looking faceplate! Love the voltage/current labels, too. :-+ :-+ I wish I had half your skill. |
| Gyro:
It's worth keeping an eye out for 'old school', (school sometime literally), linear slider lab rheostats. They make excellent resistive loads. One in my collection is a Zenith 3R3 @10A - that's 300W at 30V. Not only will it take an awful lot of power (even more with a small fan blowing across it) but it makes a great workbench heater in the winter. Avoid the Chinese round potentiometer style ones, they don't have enough surface area or full current wiper rating. Edit: My set comprises 3R3 @ 10A, 16R @ 4A and 135R @ 1.4A. Enough to cover most eventualities. |
| battmyrne216:
You have inspired me to make a big power resistor. I plan on also making a 4" 6.5 ohm I like how this turned out. |
| TERRA Operative:
I see you use the same power rating method I use. |
| Navigation |
| Message Index |
| Next page |
| Previous page |