EEVblog Electronics Community Forum

Electronics => Projects, Designs, and Technical Stuff => Topic started by: sarepairman2 on July 18, 2015, 01:01:57 am

Title: e-field ball probe design
Post by: sarepairman2 on July 18, 2015, 01:01:57 am

I want to make a easy e-field ball probe.

page 10

http://www.testequity.com/documents/pdf/anritsu/2000-1689-guide.pdf (http://www.testequity.com/documents/pdf/anritsu/2000-1689-guide.pdf)

3.5 cm ball, but, should the termination on it be series or parallel?