Electronics > Projects, Designs, and Technical Stuff
Easiest way to collect some data @50MB/s and dump to computer
magic:
Note that it has some problems with reading the final few bytes. It completely failed when I set buffer size to 15000. It seems that only some particular buffer sizes result in successful transfer, powers of two or whatever.
c64:
--- Quote from: ataradov on June 13, 2020, 03:50:42 am ---Yep, I have a couple of those boards and they are fine. And getting 45 MB/s should not be a problem at all.
--- End quote ---
Can you measure the distance between the headers on the board? I already ordered it but it still didn't arrive.
ataradov:
It is 1" between the inner rows.
hamster_nz:
If this is just a hack consider a Gigabit Ethernrt PHY, spewing UDP packets Add a sequence number in the header to detect lost packets.
If you can use a dev board that already has this for you it should be easy
c64:
I don't have only have Gigabit ethernet or USB 3, so looks like USB 2 is the only option
Navigation
[0] Message Index
[*] Previous page
Go to full version