Author Topic: Reverse / Analyze fender Bassman attenuator circuit  (Read 195 times)

0 Members and 1 Guest are viewing this topic.

Offline mkiijamTopic starter

  • Regular Contributor
  • *
  • Posts: 137
  • Country: us
Reverse / Analyze fender Bassman attenuator circuit
« on: March 10, 2024, 05:47:02 pm »
This was/is used with a Fender Bassman. I'm supposed to make sure it's working right. it's not labeled as to which jack is which. If jack 1 is the connection to the amp, then at full CCW it seems there would be an issue with the short?
 

Offline dobsonr741

  • Frequent Contributor
  • **
  • Posts: 659
  • Country: us
Re: Reverse / Analyze fender Bassman attenuator circuit
« Reply #1 on: March 10, 2024, 07:48:21 pm »
Jack 2 is to the amp. The pot's arm is the output - to jack 1. IMO, it's a lot of waste of power using this, and a risk of loading the amp with less than 4 ohm. However, it might serve a purpose. As told here. Long live the loud!

« Last Edit: March 10, 2024, 07:57:47 pm by dobsonr741 »
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf