help, need to identify a connector

[sven532]

I was asked to identify the blue connector in the picture.
It has 50 pins.
Help is kindly apricated.

[Phaseseeker]

Can you post a picture of the bottom side too?

[sven532]

I only have the PCB, maybe this helps.
(ruler in cm)

[tooki]

I was asked to identify the blue connector in the picture.
It has 50 pins.
Help is kindly apricated.

I suspect it’s a CWR-142-50-xxxx or similar

https://www.cwind.com/pcb-connectors-selector-guide

See also: https://www.digikey.de/short/8qb0tvr9 (Product Index > Connectors, Interconnects > Rectangular Connector > Board In, Direct Wire to Board, with some filters then applied)

[sven532]

Thank you for your suggestion, I already contacted them and their replay was:
"We can tell it is not a CW product."

[tooki]

Thank you for your suggestion, I already contacted them and their replay was:
"We can tell it is not a CW product."

Who is “them”?

I see you added a picture while I was writing that reply. Ok, so that must be fine-pitch ribbon cable. Look at the System 50 series in the search results (ignore the DigiKey metadata; it’s wrong, and I’ve reported the error).

[sven532]

Thank you for your time!
"Them" is CW Industries as in Electroswitch Electronic Products engineering support