| Electronics > Projects, Designs, and Technical Stuff |
| Electric go kart Controller design |
| (1/2) > >> |
| harrisonlf_:
I started an electric go kart project but I'm stuck with how to get the motor controller to work. i'm using a 48v 1800w bldc motor w 4 12v batterieis in series. I'm having some problems getting the controller working. i'm using a super sketchy chinese motor controller that came with the motor but it doesnt seem to be working when everything is connected. no wiring diagram was provided. Would it even be possible for someone new to electronics to create a motor controller for this application or should i stick with trying to get the controller to work? Also when looked at the controller there were 12 mosfets but when i was looking online most controllers only had 6 for a 3phase motor. Does anyone know why there are 12? |
| mvs:
--- Quote from: harrisonlf_ on January 18, 2019, 05:02:07 pm --- i'm using a super sketchy chinese motor controller that came with the motor but it doesnt seem to be working when everything is connected. --- End quote --- There might be some sequence of actions to get it on. Do you have user or service manual? --- Quote from: harrisonlf_ on January 18, 2019, 05:02:07 pm ---Also when looked at the controller there were 12 mosfets but when i was looking online most controllers only had 6 for a 3phase motor. Does anyone know why there are 12? --- End quote --- MOSFETs can be connected in parallel to increase current handling capability and reduce RDSon. |
| max_torque:
Go here and digest: http://scolton.blogspot.com/p/motor-controllers.html Lots of good info on all sorts of motor controllers. As a beginner you have no chance of making your own and making it work (realistically) far better to either make the one you have work or to buy one that does! Motor controllers are the classic case where people who don't understand the complexities and subtleties inherent in high power electronics say "i'm not buying that $300 motor controller when a few mosfets are just $20, so i'm going to make my own" usually, several thousands of dollars later they are no closer to making a working controller....... (Hint the reason a decent motor controller costs money is nothing to do with the part it has inside it, and everything to do with the amount of time and effort that went it to making it work robustly and reliably....... :box: ) |
| timpattinson:
I see two options: 1. Trawl ebike forums, as far as i'm aware there are some suprisingly decent chinese controllers for this power level that are well known/documented in hobbyist communities. 2. Buy a pre made VESC (https://vesc-project.com/) Again, a motor controller isn't a great beginner project. |
| netdudeuk:
The Great Scott YouTube channel has a few motor controller projects that may be interesting for you. |
| Navigation |
| Message Index |
| Next page |