An excellent tool for designing conventional power supply rectifiers is PSUD2, from Duncan Amplification (freeware).
Download link:
http://www.duncanamps.com/psud2/download.htmlNotes:
The transformer needs to be specified as no-load output voltage with series resistance, although the manufacturer specifies voltage at specified load.
There is a set of rectifier models, including Schottky diodes. Choose one that is close to your choice.
The computation will show the inrush performance, output ripple, transformer input current, and the ripple current through the filter capacitors.
Check that the voltage waveform into the regulator with your load current does not dip below the dropout point.