| Electronics > Projects, Designs, and Technical Stuff |
| Frequency measurement |
| (1/1) |
| namster:
Hi , what are the techniques for a precision frequency measurement ? , the DATA can be used but i don't think that give a good precision ! |
| EEEnthusiast:
Precision measurement can be performed using a frequency counter with an accurate time base. There are frequency counters out there which could do the job. Basically you set the counter start and stop using the 1 sec precision pulse and clock it with the input signal. for low frequencies, use a PLL to scale up the frequency before measurement. This gives better precision. |
| FenTiger:
This article describes a couple of techniques: http://n1.taur.dk/permanent/frequencymeasurement.pdf |
| namster:
thanks for the orientation , I will do some research |
| Navigation |
| Message Index |