EEVblog Electronics Community Forum
Electronics => Projects, Designs, and Technical Stuff => Topic started by: grifftech on August 17, 2016, 10:23:04 pm
-
I am adding a volt meter to a project and designed this frame for it: (https://1.bp.blogspot.com/-7iwLO3Mtnlc/V7ThoLoQAnI/AAAAAAAABqw/2MrBDThjhFU6ClI0lXp4mTmeGLUhF-75gCLcB/s320/volt%2Bpanel.jpg) The volt meter is from banggood:http://www.banggood.com/0_28-Inch-2_5V-30V-Mini-Digital-Voltmeter-p-974258.html (http://www.banggood.com/0_28-Inch-2_5V-30V-Mini-Digital-Voltmeter-p-974258.html) ( I got the red one.) It is still on its way from china. Feel free to modify my design. I will post more when I get the parts.
-
With the info i can't really see what to change and why.
But how bout some more info, like panel material and thickness, are you planing to make the front panel before or after you get the meter, do you have a precise cutout dimension?
What tools do you have at your disposal, and what are the small 3V - 6V in the bottom right corner?
-
With the info i can't really see what to change and why.
But how bout some more info, like panel material and thickness, are you planing to make the front panel before or after you get the meter, do you have a precise cutout dimension?
What tools do you have at your disposal, and what are the small 3V - 6V in the bottom right corner?
plywood, 1/4 inch, after, use the link, drill and utility knife, two different voltage rails